[1]Smith, C.S, Somerille,W.L,Swan,J.W,(1983), " Comparison test on full-scale and small – scale tubular bracing members Including damage effect" Dept. of Energy, Report No OTC 8079.
[2]Ellinas, C.P.(1984) " Ultimate strength of damaged tubular bracing member". ASCE , j. of structural Eng., Vol.110 , No.2, PP 245-259.
[3]Ellinas,C.P.and S Valsgard ,(1985), " Collision and damage of offshore structure ".A state – of – the art , Proc. of the Forth International offshore Mechanics and Arctic Eng. Symposium American Society of Mechanical Engineers,Vol.112, No.2 PP 475-495.
[4]Taby.j, Moan. T,(1985) " Collapse and residual strength of damaged tubular members ". 4th International Conference on Behavior of Offshore Structures, BOSS 85, Delft, The Netherlands.
[5]Pacheco, L.A., Durkin, S., 1988. "Denting and collapse of tubular members": a numerical and experimental study. International Journal of Mechanical Sciences Vol.30, No.5, PP 317–331.
[6]J. M. Ricles , W.B. Hamport, T E Gillum , (1992) , "Residual strength of damaged offshore steel tubular bracing ".Proc.24th Annual offshore technology Conference, OTC 6938.
[7]Fatt, M.S.H., Wierzbicki, T., Moussouros, M., Koenig, J., (1996). "Rigid-plastic approximations for predicting plastic deformation of cylindrical shells subject to dynamic loading". Journal of Shock and Vibration,Vol.3, No.3, PP169–181.
[8]Zeinoddini M, Harding JE, Parke GAR. "Dynamic behavior of axially pre-loaded tubular steel members of offshore structures subjected to impact damage".Ocean Engineering (1999);No.26,PP.963– 78.
[9]Allan JD, Marshall J."The effect of ship impact on the load carrying capacity of steel tubes". Health safety Executive (1992);OTH90 317.
[10]Frieze PA,Cho SR. "Impact damage and assessment of offshore tubulars". 25th Offshore Technology Conf,OTC 7152,pt.2,(1993);PP.193-200.
[11]Harding, J., Onoufriou, T., 1995. "Behaviour of ring- stiffened cylindrical members damaged by local denting". Journal of Constructional Steel Research Vol.33, No.3, PP. 237–257.
[12]Rambech JF, Dahl T. "Capacity of stiffened tubular cross section subjected to concentrated load impact from ship collision".13th Int. Conf.onOffshore Mechanics and Arctic Engng, (1994), No.1, PP.449-6.
[13]Ricles, J.M., Lamport, W.B., Gillum, T.E., (1992). "Residual strength of damaged offshore steel tubular bracing". In:24th International Offshore Technology Conference, OTC 6938, pp. 585–595.
[14]Suh, M.S., (1988). "Plastic analysis of dented tubes subjected to combined loading". Ph.D. thesis. Massachusetts Institute of Technology.
)